Xtramus NuWIN V1.1 User Manual

Page 169

164

Website: www.

tramus.com

XTRAMUS TECHNOLOGIES

Move the cursor to the port receiving packets with X-Trailer attached. In this case, it’s

(0,4,2). Choose Enable X-Trailer Check for the port.

The DI Check window will appear for DI setting. The factory default value for DI is 0.

Please note that the DI value set at the receive end must match the DI value set at the

transmit end, which is set through the Transmit Setup window.

There is another approach to set DI value for transmitting and receiving packets with X-

Trailer, which is set through Browse Setup window. Please see

4.20.3

for detailed

instruction.