Xtramus NuWIN V1.1 - Manual (Page 36)

31
E-mail: [email protected]
Website: www. X tramus.com
XTRAMUS TECHNOLOGIES
®
2.2.2 NuApps-2889
NuApps-2889 is a user-friendly Windows-based application software program
containing an enhanced GUI with real-time graphing. NuApps-2889 meets the testing
requirements in RFC-2285 and RFC-2889, including Forwarding Rate, Congestion
Control, Address Learning Rate, Address Caching Capacity, Errored Frame Filtering,
Broadcast Forwarding Rate, Broadcast Latency, and Forward Pressure. It generates
heavy bursts of multidirectional traffic with various protocols to test 10/100/100 Mbps
Ethernet networks.
2.2.3 NuAPI
NuAPI is an application programming interface provided for the development of
programs for MPT (Mass Production Testing) operations, which enhances efficiency
when running multiple tests on DUT. NuAPI includes Microsoft Visual C++ Library and
Borland C++ Builder Library. Xtramus provides the services of developing MPT
programs for the clients.
2.2.4 NuApps-2544
NuApps-2544 is a user-friendly and automated test suite based on industry-standard
RFC-1242 and RFC-2544 to analyze the performance of Ethernet switches, bridges,
and routers using NuStreams chassis. The multiple topologies supported by NuApps-
2544 and the load generation capabilities and the measurement accuracy of
NuStreams chassis provide users an effective way to accurately evaluate the
Throughput, Latency, Packet Loss, and Back-to-Back of a DUT or SUT in One-to-One,
One-to-Many, and Many-to-One configurations.
2.2.5 NuApps-ACPower
NuApps-ACPower is a practical and effective virtual panel to operate AC power monitor
and control module card XM-2WL1 in NuStreams chassis. The flexible interface helps
XM-2WL1 to collect long term power measurement information from the DUT in order
to be reviewed and alalyzed directly from an outlet power or remotely across a network
using NuStreams chassis.