Xtramus NuWIN V1.1 User Manual

Page 81

Website: www.

tramus.com

XTRAMUS TECHNOLOGIES

4.9.2.2 Streams Control Mode

For Stream control, packets are sent continuously (with gaps) in the continuous

mode. In the single mode, only one packet is sent. In the burst mode, a number of

packets are sent at once, and their number can be adjusted. In the Multi-burst mode,

multiple batches of packets will be sent, and the dialogue will stretch for further setup.

Up to 2

– 1 packets can be set for Packets per Burst, and up to 16,777,215 bursts

can be set for Bursts per Stream.

4.9.2.3 Transmit Control

X-Trailer appendage is not supported in default setting. Choose to enable it. CRC

Checksum can be chosen to remove its appendage. For error configuration, choose

desired errors in the Error Generation dialogue.

4.9.2.4 Inter-Frame Gap