Xtramus NuApps-SwitchPerform V1.8 - Manual (Page 5)

5
1. NuApps-SwitchPerform
NuApps-SwitchPerform is a utility software that designed for analyzing Ethernet switch,
PC/Notebook, and network video player. NuApps-SwitchPerform’s load-generating
capabilities provide an effective way to evaluate DUT’s (Device Under Test) Utilization,
Throughput, Packet Loss, CRC Error, and Latency with NuApps-SwitchPerform’s three
different modes: Network Switch, PC/Notebook, and Others (Network Video Player). Test
results/statistics can be viewed with NuApps-SwitchPerform’s intuitive real-time chart and counter report.
NuApps-SwitchPerform is designed for Xtramus Technologies XM-RM series module cards listed in the
table down below:
Module Cards Support NuApps-SwitchPerform
XM-RM731
＊Note: NuStreams-2000i and NuStreams-600i are required as well.
Also, please make sure that your PC meets the requirements listed in the table down below before
installing NuApps-SwitchPerform.
OS Windows XP Windows Vista
CPU 800MHz CPU 1.6 GHz, 32 bits (x86) CPU
RAM 256MB RAM 1GB RAM
HDD 20MB available space 20MB available space
＊Note: The HDD requirement listed here are the minimum available Hard-Disk space for installing both
NuApps-SwitchPerform and WinPcap. However, large amount of data will be generated while running
NuApps-SwitchPerform. It is recommended to preserve enough available Hard-Disk space to store
these data.
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®