Xtramus NuApps-SwitchPerform V1.8 - Manual (Page 15)

15
After starting NuApps-SwitchPerform, a Select Config window will pop up. You can choose if you would
like to Open an Existing Configuration or Create a New Configuration. Please press OK to continue.
Description – Select Config
As mentioned above, you have to reserve ports on module cards before performing tests with
NuApps-SwitchPerform. You can do so by either Open an Existing Configuration or by Create a New
Configuration.
Open an Existing Configuration
If you have a previously saved configuration file
stored in your PC, you can load it and apply all
the setting you’ve made by choosing “Open an
Existing Configuration” from the Select
Config pop-up window.
Configuration files are saved in the format of
“＊.cfg”.
Create a New Configuration
If you are running NuApps-SwitchPerform for
the first time or you would like to create a new
configuration, please choose “Create a New
Configuration” from the Select Config pop-up
window.
For more information regarding to creating a
new configuration for NuApps-SwitchPerform,
please refer to 4.5. Test Configuration on page
25.
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®