WaveWare API-8 Alarm Monitoring - Manual (Page 9)

Incoming Data Type:
RS232, ASCII Characters
Incoming Data Protocols: RS232, TAP, COMP2
Incoming Data String: Max 256 Characters followed by Carriage Return
Message Length: Programmable 1 to 240 Characters
Incoming Data Baud Rate: 600,1200,2400,4800 or 9600 (programmable)
Incoming Data Comm. Settings: N,7,1 or E,7,1 or 0,7,1 or N,8,1 (programmable)
Incoming Data Port: DB9 Female
Pin Assignments: Pin 2: Tx, Pin 3: Rx Pin 5: Gnd
Event Types: Eight Programmable Event Types
Key Strings: 2 Keystrings per Event Type, 20 Characters programmable
Pager ID Numbers: Send all Messages to a single Pager ID Number or Send Messages
based on Event Type to different pager ID Numbers
Consecutive Spaces: Messages are packed by removing X consecutive spaces
(Programmable)
Character Masks: Up to 20 Characters may be masked. Masked characters are not
paged when they appear in a valid text string. Messages which
contain only masked characters, are discarded and not paged.
Header: 20 character programmable text, which is inserted at the beginning
of each message string that is paged to identify the origin of the
paged messages.
Telephone Interface Specification
Telephone Line Set:
5 foot - RJ11
Telephone Line In Connector: RJ11
Telephone Line Out Connector: RJ11
Line Seizure Relay: Line Seizure effective on all down stream equipment
Paging System Dial Up Number: Up to 25 Characters (programmable)
Paging System Access Password: Up to 20 Characters (programmable)
Dialing Method: DTMF
Paging System Baud Rate: 300, 600, 1200 or 2400 Baud (programmable)
Paging System Comm. Settings: N,7,1 or E,7,1 or N,8,1 (programmable)
Paging System Protocols: TAP 1.8
PAGE 2-3