Tempest TornadoRetrofit Kits - Manual (Page 29)

Tornado Enclosure User Manual
page 29
Re-installing the Luminaire using Omega Clamps
This applies to most luminaire types:
1. Mount the luminaire’s Omega clamps securely onto the fixture base (Omega clamps may be
purchased from the luminaire manufacturer if you don’t have them). Make sure that the
fasteners lock positively in place.
2. Bolt the clamps to the fixture bracket.. CHECK THAT THE FIXTURE IS CENTERED ON THE
FIXTURE BRACKET.
3. Replace the fixture bracket/fixture assembly in the enclosure, and bolt firmly in place.
Diagram – Mounting with Omega Clamps
Fixture Bracket
Omega clamp –
orientation may vary
Bolt clamp in place
from below