Tempest TornadoRetrofit Kits - Manual (Page 13)

Tornado Enclosure User Manual
page 13
Power Connections
IMPORTANT Tempest enclosures are supplied for either 120VAC 50/60Hz, or 208-
240VAC, 50/60Hz operation. Tempest Lighting is not liable for damage or
failure to operate correctly due to connection to an inappropriate electrical
supply.
ALL ELECTRICAL CONNECTIONS MUST BE UNDERTAKEN BY A QUALIFIED
ELECTRICIAN, IN COMPLIANCE WITH LOCAL NORMS AND STANDARDS.
Note: wire colors may differ depending on applicable electrical standards. European wire colors are shown here.
IMPORTANT: MAKE SURE THAT TERMINAL SCREWS ARE FULLY BACKED OUT BEFORE INSERTING WIRES.
Projector Supply
(split mode)
Enclosure Supply
(100-250VAC 50/60Hz)
Fan 1
Fan 2
Heater(s)
Projector
receptacle
Cut here for split
supply operation