Assembly – Delta 20-330 User Manual

Page 7

7 - English

ASSEMBLY

ASSEMBLY TOOLS REQUIRED

Open end wrenches 1/4", 3/8" and 1/2" (not included)

Hex Wrench (included)

Phillips and Flat Head Screwdrivers

ASSEMBLY TIME ESTIMATE

Assembly for this machine takes approximately 1-2 hours.

For your own safety, do not connect the machine to the power source until the machine is

completely assembled and you read and understand the entire instruction manual.

UNPACKING AND CLEANING

Carefully unpack the machine and all loose items from the shipping container(s). Remove the rust-preventative oil from
unpainted surfaces using a soft cloth moistened with mineral spirits, paint thinner or denatured alcohol.

Do not use highly volatile solvents such as gasoline, naphtha, acetone or lacquer thinner for cleaning your

machine.
After cleaning, cover the unpainted surfaces with a good quality household floor paste wax.

Fig. 1B Hardware

1. 5/16"-23-2T Flat washer (12)

2. 5/16" Hex nut (22)

3. 5/16"- 1"L Hex head screw (6)

4. 5/16"-18-2T Flat washer (16)

5. 5/16"-1/2"L Carriage bolt (16)

6. Rubber

foot

(2)

7. 3/16"

Hex

nut

8. 3/16"-1/2"L Round head screw

9. 1/4"

Hex

nut

10. 1/4"-1/2"L Flat head screw

11. 5/8"-30- 3T flat washer (4)

12. Cotter pin (4)

13. 1/4"-15-1.5T flat washer

14. 1/4"-1/2"L Hex head screw (2)

15. 4mm Hex wrench

Fig. 1B