Delta 36-751 - Manual

5
10” Tilting Arbor Saw
SPECIFICATIONS
High quality and feature loaded.
•
Magnetic motor starter with thermal
overload and no-voltage protection.
•
Full cabinet with motor cover
for sawdust containment.
•
Built-in storage for miter
gage, rip fence and blade
wrench.
•
Extra-large cast-iron table with
extension wings provides ample
support for large work.
•
Integral T-slot grooves prevent
miter gage from falling during wide
cut-off operations.
•
Convenient up-front blade raising and
tilting controls for safe, easy operation.
Model 36-755 10 Ó Tilting Arbor Saw.
Includes basic machine with Jet-Lock ® ,
Micro-Set ® rip fence; see-thru blade guard,
splitter and anti-kickback attachment; front
graduated guide bar, rear guide bar, miter
gage, 10
Ó dia. saw blade, table insert, arbor
and motor pulleys, V-belt, (2) table extension
wings, motor cover; 2HP, 230V, single phase,
60 Hz., TEFC motor; motor starter and
instruction manual.
Model 36-751 10 Ó Tilting Arbor Saw with 30 Ó Unifence ®
Saw Guide. Same as Model 36-755 above less Jet-Lock ® ,
Micro-Set ® rip fence with front and rear guide bars and (1)
table extension wing, but with Unifence ® Saw Guide which
includes fence, carriage assembly, front guide bar, table
frame, legs and mounting hardware. Less table board.
Model 36-752 10 Ó Tilting Arbor Saw with 52 Ó Unifence ®
Saw Guide. Same as Model 36-755 above less Jet-Lock ® ,
Micro-Set ® rip fence with front and rear guide bars and (1)
table extension wing, but with Unifence ® Saw Guide which
includes fence, carriage assembly, front guide bar, table
frame, legs, shelf support brackets and mounting hardware.
Less table and shelf boards.
Cuts stock 3 1 ⁄ 8
Ó thick; a full
2 1 ⁄ 8 Ó at 45° blade tilt. 2 HP
motor delivers plenty of power
for fast, efficient cutting.
Unique “table top located”
adjusting screws for accurate
setting of 45° and 90° positive
blade stops.
Motor ........................................... 2 HP, 230V, 60 Hz., single phase
Blade:
Diameter .................................................................... 10
Ó (254 mm)
Arbor ............................................................................. 5 ⁄ 8 Ó (16 mm)
Speed ............................................................................... 4000 rpm
Capacity:
Max. depth of cut 90° ................................................. 3
1 ⁄ 8 Ó (79 mm)
Max. depth of cut 45° ................................................. 2 1 ⁄ 8
Ó (54 mm)
Max. rip R of blade .................................................... 25 Ó (635 mm)
Max. rip L of blade .................................................. 15 1 ⁄ 2
Ó (394 mm)
Max. rip R of blade w/30 Ó Unifence Saw Guide ........ 30 Ó (762 mm)
Max. rip R of blade w/52 Ó Unifence Saw Guide ...... 52 Ó (1321 mm)
Max. rip L of blade w/30 Ó or
52 Ó Unifence Saw Guide ....................................... 8 3 ⁄
4
Ó (222 mm)
Table in front of saw blade at
max. cutting height .............................................. 12 1 ⁄
4
Ó (311 mm)
Max. width of dado ..................................................... 13 ⁄ 16 Ó (21 mm)
Table:
Size w/extension wings .......................... 36
Ó x 27 Ó (914 x 686 mm)
Size w/ext. wing and 30 Ó
Unifence Saw Guide ...................... 62 1 ⁄ 2 Ó x 27 Ó (1588 x 686 mm)
Size w/ext. wing and 52 Ó
Unifence Saw Guide ...................... 78 1 ⁄ 2 Ó x 27 Ó (1994 x 686 mm)
Height ...................................................................... 34 1 ⁄ 4 " (870 mm)
Miter gage groove ........................................ 3 ⁄ 8 Ó x 3 ⁄ 4 Ó (10 x 19 mm)
Overall Dimensions:
Width ....................................................................... 45
Ó (1143 mm)
Width w/30 Ó Unifence Saw Guide ........................ 67 1 ⁄ 2 Ó (1715 mm)
Width w/52 Ó Unifence Saw Guide ........................... 83 Ó (2108 mm)
Depth ......................................................................... 32 Ó (813 mm)
Height ........................................................................ 39 Ó (991 mm)
Weight: Model 36-755 ......................................... 288 Ibs. (131 kg)
Model 36-751 ......................................... 290 Ibs. (132 kg)
Model 36-752 ......................................... 293 Ibs. (133 kg)
Model 36-755 10 Ó Tilting Arbor Saw
Model 36-752 10 Ó Tilting Arbor Saw
with 52 Ó Unifence Saw Guide
and 34-998 Accessory Table and
Shelf Boards.
Model 36-751 10 Ó Tilting Arbor Saw
with 30 Ó Unifence Saw Guide and
34-914 Accessory Table Board.
For accessories, see page 27
®