Paxton Superchargers Denali - Manual (Page 41)

13-1
P/N: 4809639
©2004 Paxton Automotive
All Rights Reserved, Intl. Copr. Secured
12APR04 v3.0(01-03Denali/Esc(4809639v3.0))
Section 13
RADIATOR TUBE INSTALLATION (DENALI/ESCALADE ONLY)
13. RADIATOR TUBE INSTALLATION (Denali/Escalade Only)
A. Cut the supplied hose as shown in Fig.
13-a.
B. Using the two original clamps and the two
supplied #24 hose clamps, attach the previ-
ously trimmed hose pieces to each end of
the supplied radiator tube, radiator and
water pump. (See Figs. 13-a, 13-b.)
C. Orient the radiator tube and hoses for best
fit and tighten all clamps.
D. Use the supplied adel clamp and 1/4-20 x
1/2"Í screw and washer to secure the radia-
tor tube to the insert on the large plastic
inlet duct. (See Fig. 13-b.)
E. Refill the coolant reservoir.
Fig. 13-a
Fig. 13-b