Tampering detection, Settings – NEXCOM NCr-302-VHR User Manual
Page 63
Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.
53
Chapter 2: Camera Configuration
NCr-302-VHR User Manual
Tampering Detection
This section is used to configure tamper detection settings.
Settings
Enable Tampering Detect
Enables or disables tamper detection. When enabled, the camera will trigger
actions enabled in the Event Actions menu upon detecting image blurs.
Sensitivity
Configures the sensitivity of the tamper detection, the range is 1~100, with
1 being the least sensitive.
This manual is related to the following products: