NEXCOM NCr-302-VHR - Manual (Page 34)

Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. 24
Chapter 2: Camera Configuration
NCr-302-VHR User Manual
Mask Zones
You can configure up to 3 privacy masks, the instructions below illustrate
how to setup 3 privacy masks.
1. Select the color of the mask in the drop down list.
2. To create the first mask, check the Enable mask zone 1, and on the
live video screen below, select the area to mask by holding down the
mouse button and drag to make a rectangular square, release the
button once the desired area is covered.
3. Press the Setting Area button in Enable mask zone 1 to set this area
as mask.
4. You will see the selected area turn black or white, depending on which
color was chosen (This example uses black as the mask color).
Rectangular
square
Mask area
5. To create the second and third mask, check the Enable mask zone 2
and Enable mask zone 3 options, then repeat steps 2 to 3 outlined
earlier.
To delete a mask, check the zone number you like to remove, and press the
Remove button.