Camera settings cont, White balance, Exposure – NEXCOM NCr-302-VHR User Manual
Page 30: White balance exposure
Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.
20
Chapter 2: Camera Configuration
NCr-302-VHR User Manual
White Balance
White Balance Mode
Enables or disables the white balance function on the camera. White balance
allows the camera to produce more accurate colors under different lighting
conditions. The following modes can be selected:
Off:
Disables white balance function.
Auto:
Automatically adjusts the white balance to suit the
current lighting condition.
Fixed Outdoor: Adjusts the white balance for outdoor daylight.
Incandescent:
Adjusts the white balance for indoor light.
Fluorescent:
Adjusts the white balance for fluorescent light.
Exposure
Exposure Mode
This option configures the anti-flickering function of the camera. If the
image is suffering from flickering under fluorescent light, selecting Auto
will allow the camera to automatically adjust the light frequency to match
the current fluorescent lighting condition and prevent flickering. You can
also manually set it to Anti-Flicker 50Hz, Anti-Flicker 60Hz or Locked.
Exposure Value Adjust
Adjusts the exposure value on the camera, the range is 0 ~ 255. Press the <
button to decrease the value, or > button to increase the value. The default
value is 128.
Camera Settings Cont.