Network, Tcp/ip, Ip address configuration – NEXCOM NCr-302-VHR User Manual
Page 35: Current network settings, Ip address configuration current network settings
Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.
25
Chapter 2: Camera Configuration
NCr-302-VHR User Manual
Network
TCP/IP
This section configures the network settings of the camera.
IP Address Configuration
Enable DHCP
Enables DHCP, use this feature if the camera is connected to a network with
DHCP server.
Static IP Address
To manually configure an IP address, select this option and input the IP
address, subnet mask, default gateway, primary and secondary DNS server
address.
Enable IPv6
To manually configure an IPv6 address, select this option and input the IPv6
address.
Current Network Settings
Displays the current IP address, subnet mask, default gateway, primary and
secondary DNS server address of the camera.
Save
Save button to apply the configurations, click on this button once all the
settings are confirmed for the new changes to take effect.
Reset
Reset button to discard all the settings applied.