NEXCOM NCr-302-VHR - Manual (Page 50)

Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. 40
Chapter 2: Camera Configuration
NCr-302-VHR User Manual
Firmware Upgrade
This section is used to update the IP camera’s firmware.
Firmware Version
Application Version
Displays the current firmware version.
Update
Specify the Firmware Image File to Upgrade
To update the camera’s firmware, click on the Browse button and locate
the firmware image file, once the file is selected, press the Update button
to begin.
CAUTION! CAUTION! CAUTION!
The firmware update process will take around 15 minutes to
complete, during this time, do not disconnect the network
cable, reset or power off the IP camera, as you may damage
the device.