NEXCOM MPPC 2120T User Manual

Page 95

Chapter 4: BIOS Setup

MPPC 2120T/3220T User Manual

ACPI Configuration

This section is used to configure the ACPI configuration.

Enable/Disable ACPI

support for operating

system.

ENABLE: If OS

supports ACPI.

DISABLE: If OS does

not support ACPI.

BIOS SETUP UTILITY

← →

Select Screen

↑↓

Select Item

Change Option

General Help

F10 Save and Exit

ESC Exit

ACPI Settings

ACPI Aware O/S

[Yes]

ACPI APIC Support

[Enabled]

APIC ACPI SCI IRQ

[Disabled]

Advanced

ACPI Aware OS

Enables or disables the ACPI function of the operating system.

ACPI APIC Support

Enables or disables the ACPI APIC function. Include ACPI APIC table pointer
to RSDT pointer list.

APIC ACPI SCI IRQ

Enables or disables the APIC ACPI SCI IRQ.

USB Mass Storage Reset Delay

Selects the number of seconds POST waits for the USB mass storage de-
vice after the start unit command.

Device #1

Displays the connected device.

Emulation Type

Auto

USB devices that are less than 530MB will be emulated as
a floppy drive and the remaining as hard drives.

Forced FDD

Forces an HDD formatted drive to boot as FDD (e.g. ZIP
drive)

Floppy

The USB device will be emulated as a floppy drive.

CDROM

The USB device will be emulated as a CD-ROM drive.

Hard Disk

The USB device will be emulated as a hard disk drive.

This manual is related to the following products:

MPPC 3220T