NEXCOM MPPC 2120T - Manual (Page 83)

Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. 67
Chapter 3: System Setup
MPPC 2120T/3220T User Manual
3. The photo below shows the rear view of the Panel PC mounted on the
panel.
2. Position the mounting clamps along the rear edges of the Panel PC.
The first and second clamps must be positioned and secured diagonally
prior to mounting the rest of the clamps. Tighten the clamp’s screw
until it touches the panel. Do not overtighten the screws to prevent
damaging the Panel PC.
Panel Mount Kit (Optional)
1. The optional mounting clamps must be attached along the rear edges
of the Panel PC.
Panel wall
Panel PC
Note: The mounting clamps are included in the MPPC 2120T Panel
Mount Kit (P/N: 5043330466X00) and MPPC 3220T Panel
Mount Kit (P/N: 5043330465X00).