NEXCOM MPPC 2120T - Manual (Page 113)

Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. 97 MPPC 2120T/3220T User Manual
Appendix B: Power Consumption
a
PPendix
B: P
oWer
C
onsumPtion
Power Consumption Measurement
Purpose
The purpose of the power consumption test is to verify the power dissipa-
tion of the system and the load of the power supply.
Test Equipment
1. PROVA CM-07 AC/DC CLAMP METER
2. Burn-in test ver: 2.0
Device Under Test
DUT: Sys #1
Test Procedure
1. Power up the DUT and then boot Windows XP.
2. Enter the standby mode (HDD power down).
3. Measure the power consumption and record it.
4. Run the Burn-in test program to apply 100% full loading.
5. Measure the power consumption and record it.
MPPC 2120T
+12V +24V +30V
Full-Loading Mode 4.14A 2.09A 1.68A
Total 49.68W 50.16W 50.4W
Standby Mode 0.92A 0.48A 0.39A
Total 11.04W 11.52W 11.7W
MPPC 3220T
+24V
Full-Loading Mode 2.72A
Total 65.28W
Standby Mode 0.56A
Total 13.44W