NEXCOM MPPC 2120T - Manual (Page 101)

Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. 85
Chapter 4: BIOS Setup
MPPC 2120T/3220T User Manual
Quiet Boot
Enabled Displays OEM logo instead of the POST messages.
Disabled Displays normal POST messages.
Bootup Num-Lock
This allows you to determine the default state of the numeric keypad. By
default, the system boots up with NumLock on wherein the function of
the numeric keypad is the number keys. When set to Off, the function of
the numeric keypad is the arrow keys.
PS/2 Mouse Support
Enables or disables the PS/2 mouse.
System Keyboard
Enables or disables all keyboards connected to the system.
Hit ‘DEL’ Message Display
When enabled, the system displays the “Press DEL to run Setup” mes-
sage during POST.
Interrupt 19 Capture
When enabled, it allows the optional ROM to trap interrupt 19.
Specifies the boot
sequence from the
available devices.
A device enclosed in
parenthesis has been
disabled in the
corresponding type
menu.
BIOS SETUP UTILITY
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
← → Select Screen
↑↓ Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Boot Device Priority
1st Boot Device [USB:USB Hotplug FD]
Boot
Boot Device Priority
This section is used to select the boot priority sequence of all available
devices.
1st Boot Device
The BIOS will boot the operating system according to the sequence of
the drive selected.