KLING & FREITAG K&F TOPAS - Manual (Page 43)

User's manual System Amplifier K&F TOPAS
KLING & FREITAG GMBH © 2014 Version 3.1 Page 43 of 65
You can select the following options for every GPO:
Setting Option Description
low / open always 0V always
high / closed always 5V
low / open 0 V, switched on amplifier power on
high / closed 5 V, switched on amplifier
low / open 0 V, switched on amplifier signal paths ready for
operation system ready
high / closed 5 V, switched on amplifier signal paths ready for
operation
low / open 0 V, when channel 1 is muted Mute CH1
high / closed 5 V, when channel 1 is muted
low / open 0 V, when channel 2 is muted Mute CH2
high / closed 5 V, when channel 2 is muted
low / open 0 V, when channel 1 and 2 are muted Mute CH1+2
high / closed 5 V, when channel 1 and 2 are muted
low / open AES/EBU input is activated, otherwise analog input AES-EBU/
Analog
high / closed AES/EBU input is activated, otherwise analog input
low / open PRIO audio mode is activated PRIO-audio
high / closed PRIO audio mode is activated
Please note:
• at low/open the contact is always open
• bei high/close ist der Kontakt immer geschlossen