KLING & FREITAG K&F TOPAS - Manual (Page 32)

User's manual System Amplifier K&F TOPAS
KLING & FREITAG GMBH © 2014 Version 3.1 Page 32 of 65
Channel 1:
•
RMS-Level: Audio signal level
• Limiter: status notification of the peak limiter (PK), RMS limiter (RMS) and current (CUR)
• Clipping: status notification of the analogue input (ADC) and the amplifier module
(AMP)
• Channel 1: toggle between 'On' (open channel) and 'mute' (channel off)
• Input-Routing: Switches between 'Input 1', 'Input 2' and 'Monomix(-6dB)'
• Delay: Input in ms, max. 2000 ms
• invert Phase: invert Phase 'on' or 'off'
• Gain: Enter gain in dB, this value is the volume level of the amplifier itself.
The total gain of the corresponding TOPAS is the sum of 'Group Gain' and 'Gain'.
• Group Gain: Enter gain in dB, this value will be specified by the remote software in the
future.
• Filter: Possibilities to set four free selectable filters, 'Type', 'F[Hz]', 'Q', G[dB] and
activation of this setting
Channel 2 has the same settings as channel 1.
Further information about filters and their functionality, see page 57.