KLING & FREITAG K&F TOPAS - Manual (Page 35)

User's manual System Amplifier K&F TOPAS
KLING & FREITAG GMBH © 2014 Version 3.1 Page 35 of 65
6.4 Web Interface Setup
Menu: Setup
In this menu, you adjust all important settings on the amplifier.
6.4.1 Software Update
Menu: Setup » updates
Under this menu item, the web interface shows more detailed information about the
firmware.
To update the firmware, a firmware package is required. You can get the package from your
dealer.
The firmware packages are digitally signed. For this amplifier model, you can only install
firmware versions released by Kling & Freitag.
Please pay attention to the 'Release-Notes' belonging to each update. It may be necessary
to update other components or to adjust the system settings in conjunction with a firmware
update.
Before an update, make sure the device is connected to the power supply and in standby
mode.