KLING & FREITAG K&F TOPAS - Manual (Page 3)

User's manual System Amplifier K&F TOPAS
KLING & FREITAG GMBH © 2014 Version 3.1 Page 3 of 65
Table of contents
1 Introduction 6
1.1 Symbols in User's Manual 6
1.2 Information about this User's Manual 6
2 General Safety Instructions 7
3 Product Description 8
3.1 TOPAS Power Amplifier 8
3.2 Concept of a Network Enabled Amplifier 8
3.3 Scope of Delivery 9
4 Installation and Connection 10
4.1 Setup Location 10
4.1.1 Rack Mounting 10
4.2 Connectors and Controls 11
4.2.1 Front 11
4.2.2 Rear 12
4.3 Mains Connector 14
4.3.1 Dimensioning of Power Supply System and Cool Air Supply 14
5 Configuration and Operation 15
5.1 Modes of Operation 15
5.1.1 Standby Mode 15
5.1.2 Operating Mode 15
5.1.3 Error Mode 15
5.2 Configuring the Modes of Operation 15
5.3 Operating Concept 16
5.3.1 Displays and Controls 16
5.3.2 Integrated Web Interface 17
5.4 Network 18
5.4.1 Ethernet Ports 18
5.4.2 Network Topology 19
5.4.3 IP Address Assignment 20
5.4.4 Allocating the Device in the Network 21
5.4.5 Programmes to Allocate mDNS Devices 21
5.4.6 Network Security 21
5.5 Audio Functions 21
5.5.1 Audio In-, Outputs 22
5.5.1.1 Analogue Inputs 22
5.5.1.2 AES/EBU digital input (can be optionally activated) 22
5.5.2 Connecting Speakers 22