KLING & FREITAG K&F TOPAS - Manual (Page 28)

User's manual System Amplifier K&F TOPAS
KLING & FREITAG GMBH © 2014 Version 3.1 Page 28 of 65
6. Web Interface
6.1 Menu Overview
To enable fast, safe, and clearly arranged use of the TOPAS, we integrated a high-
performance web interface instead of a display. This not only allows you to configure
the device from any place in the network, but you can also monitor and update it. In this
chapter, we describe how to adjust the settings and which information you get from the web
interface.
On the page header of every page, you can see the connection speed, the online status and
the device descriptions given in 'Setup'. You will find the navigation menu in the lower part
of the page header. By clicking on a menu item, you can switch between the various pages.
Under a selected main menu item, a small triangle is shown. A selected subitem in the row
under it is shown in bold type.
Setting Submenu Function
Status System Information Overview of the most important settings,
switching between standby and operating
mode
Gain, filter and delay
settings management
speakers Speaker block assignment
Audio
PRIO-audio Managing PRIO audio settings
updates Firmware management
network Management of network login procedures
description Specific information about the amplifier
users Password management
on/standby Management of the unit's on/off-behaviour
frontpanel controls Enable / disable the controls on the front
page.
Setup
gpio Inputs and outputs management
topics Calculation formula, GPO diagram,
explanation IP addresses
contact K&F K&F contact
Help
about Information about firmware version and
serial number of the TOPAS