KLING & FREITAG K&F TOPAS User Manual

Page 36

Text mode
Original mode

User's manual

System Amplifier K&F TOPAS

Version 3.1

Page 36 of 65

Under 'Sending an update package', you can send a given firmware file with the ending 'fwu'
from your hard drive to the TOPAS.

Choose a file under the item 'Choose a file to upload'.

After opening the chosen file with 'open', the status of the upload is shown. When the
update has been successful, a notification appears on the web interface.

To finish the update procedure, you have to restart the TOPAS by pushing the button Reboot.

If the update is interrupted, the TOPAS keeps in the current version of the firmware. To
properly finish the interrupted update procedure, you have to restart the update.