KLING & FREITAG K&F TOPAS - Manual (Page 40)

User's manual System Amplifier K&F TOPAS
KLING & FREITAG GMBH © 2014 Version 3.1 Page 40 of 65
6.4.5 Power-On Options
Menu: Setup » on/standby
Under this menu item, you define the delay time for power on as well as the operating mode
after connecting to the power supply.
In the setting 'Delay time for switching main supply on', the delay time that the amplifier
waits before switching from standby mode to operating mode is in milliseconds.
If you want to switch on several devices simultaneously using one common switch, you must
not exceed an inrush current of 7A to avoid overloading the mains. With this setting, you
avoid an overload.
With the option 'After AC powerloss', you determine if the amplifier should be in operating
mode after connection to the power supply.
This can be useful when the amplifier once again comes back to life after a power failure and
the device should automatically switch to operating mode.