KLING & FREITAG K&F TOPAS - Manual (Page 12)

User's manual System Amplifier K&F TOPAS
KLING & FREITAG GMBH © 2014 Version 3.1 Page 12 of 65
4.2.2 Rear
On the rear panel are the following connections:
Position Name Description
A Input, link for
digital audio signals
according to AES/EBU This interface can be optionally activated. Please
contact your dealer to unlock the AES/EBU interface
with a password.
XLR, pin assignment 1=ground, 2=+, 3=-
110 ohms cables are recommended.
Please see chapter 5.4.1.
B Terminal connector
for GPI and GPO Please see chapter 5.5.
Suitable connectors:
9 pin terminal block, 3.81mm grid
e.g. Phoenix Contact order no. 1803646 or 1748040,
Würth order no. 691 361 300 009
C Terminal connector
for analogue audio
inputs 1, 2 and
priority input Mating Connectors: 9 pin
terminal block, pitch 3.81mm
eg Phoenix Contact No. 1803646 or 1748040,
Würth Art 691 361 300 009
D Analog audio input
for channel 2
E Analog audio input
for channel 1
XLR Pin 1=ground, 2=+, 3=-
Please note chapter 5.4.1.
F Name plate Serial number, MAC address, exact device name
G Ethernet ports Access to the network.
All connections are equal.
RJ45 IEEE 802.1
10/100Mbps, half-or full-duplex (auto), auto
detection of the polarity (no crossover cable
required).
CAT5 or higher recommended.
Please note chapter 5.3.