Appendix a. mechanical dimensions – DekTec DTM-3200 IP-ASI Converter User Manual
Page 36
DTM-3200 – OEM Ethernet TSoIP Converter
User Manual
36
Appendix A. Mechanical Dimensions
Hardware revision R0, R1 and R2:
The diameter of the mounting holes is 2.7mm (intended for M2.5 bolts)
Maximum outer diameter of nut/ring: 7.0mm
Hardware revision R3:
The diameter of the mounting holes is 3.2mm (intended for M3 bolts)
Maximum outer diameter of nut/ring: 7.0mm
Warning: While mounting the DTM-3200, care should be taken not to damage components that are
close to the mounting holes, both on the top and bottom side of the board.