DekTec DTM-3200 IP-ASI Converter - Manual (Page 34)

DTM-3200 – OEM Ethernet TSoIP Converter
User Manual
34
Min Typ Max Unit / Remarks
Port used as input
Interface standard M-LVDS
Clock rate (accepted) 10 30 MHz
Input impedance 90 132 Ω
Common mode voltage 0.625 1.875 V
Signal amplitude 100 2000 mV
Bitrate 0.01 240 Mbps
Port used as output
Interface standard M-LVDS
Clock rate (fixed) 27 MHz
Output impedance 100 Ω
Common mode voltage 1.6 V
Signal amplitude 454 mV
Bitrate 0.01 214 Mbps
5.4 Transport-Stream input/output over IP
Min Typ Max Unit / Remarks
General
TSoIP encapsulation UDP or SMPTE 2022-2
Input-to-IP delay 1 ms
IP-to-output delay 1 120 *1 ms (programmable)
IP input jitter tolerance 1 120 *2 ms (computed)
UDP
TS-packet size 188 or 204 bytes
TS packets / IP packet 1 7 No long UDP packets
SMPTE 2022-2
Transport protocol RTP
FEC SMPTE 2022-1
Packet size 188 or 204 bytes
TS packets / IP packet 1 7
FEC Size: L 1 20
FEC Size: D 4 20
FEC Size: LxD 4 100
*1 Maximum delay depends on input bitrate and #TS packets per IP packet
*2 Maximum jitter tolerance depends on programmed IP-to-output delay and on FEC delay