DekTec DTM-3200 IP-ASI Converter - Manual (Page 18)

DTM-3200 – OEM Ethernet TSoIP Converter
User Manual
18
3.4.8 Stream status LED
This LED indicates the status of the ASI and parallel stream. The following colors are used for status
indication:
ASI output mode
Short red/green flashes No output generated on ASI and parallel outputs
Red/green Generating live output on ASI and parallel outputs
Note: When the ‘Rate Estimation’ (category 0x81, setting 0x16) is set to 3, bitrate estimation in the
DTM-3200 is turned off and the stream status LED will always be Red/green.
ASI input mode
Short green flashes No carrier detected on ASI or parallel input
Long green flashes Carrier detected but no data on ASI or parallel input
Green Valid signal detected on ASI or parallel input
Red Erroneous signal detected on ASI or parallel input
3.4.9 DTM-3200 status LED
This LED indicates the current status of the DTM-3200. The following colors are used for status
indication:
Red Running in failsafe mode
Red/green Booting
Green Running in operational mode