Dataman 520 Series - Manual (Page 6)

DATAMAN 520 series oscilloscope with rollmode
User’s Guide
Software License Agreement
This legal document is an agreement between you, the end user, and Dataman
Programmers Ltd. By installing this product on your computer, you are agreeing to
become bound by the terms of this agreement and warranty conditions.
1. GRANT OF LICENSE. Dataman Programmers Ltd as Licensor, grants you, the
Licensee, a nonexclusive right to use and display this copy of the roll-mode software
(hereinafter the "SOFTWARE"), device and accompanying written materials, on a
single COMPUTER at a single location and only together so long as you comply with
the terms of this License.
2. OWNERSHIP. As the LICENSEE, you own the magnetic or other physical media
on which the SOFTWARE is originally or subsequently recorded or fixed, but an
express condition of this License is that Dataman Programmers Ltd retains title and
ownership of the SOFTWARE recorded on the original disk copy(ies) and all
subsequent copies of the software, regardless of the form or media in or on which the
original and other copies may exist. This License is not a sale of the original
SOFTWARE or any copy.
3. COPY RESTRICTIONS. This SOFTWARE, device and accompanying written
materials are copyrighted. Unauthorized copying or copy attempt of the device,
including module which has been modified or included with any other system, or of
written materials is expressly forbidden. It is, however, allowed to pass SOFTWARE
on as the DEMO version. You may be held legally responsible for any copyright
infringement which is caused or encouraged by your failure to abide by the terms of
this License.
4. DISCLAIMER OF THE WARRANTY OF ANY KIND CONCERNING
SOFTWARE. This SOFTWARE and accompanying written materials are provided
"AS IS" without a warranty of any kind. Further, Dataman Programmers Ltd does not
warrant, guarantee or make any representations regarding the use, or the results of
use, of the SOFTWARE, device or written materials in terms of correctness, accuracy,
reliability, currentness, or otherwise. The entire risk as to the results and performance
of the software is assumed by you.
Precautions
Please follow these recommendations to avoid any possible problems that might occur
while using the oscilloscope:
- read the User’s Guide
- always connect device using cable, which is the part of package. If it is not possible,
always use USB 2.0 cable.
- never connect signal with absolute voltage higher than 200V to measuring inputs.
This value is valid for frequencies lower than 100kHz. Over this frequency, the
voltage lowers with raising frequency. For example frequency 200kHz of 100V,
400kHz of 50V is the limit.
- 6 -