Dataman 520 Series - Manual (Page 11)

DATAMAN 520 series oscilloscope with rollmode
User’s Guide
decreases the value by minimal steps. Clicking in between the slider and the arrows
changes the value by larger steps.
Select the value from the combo box – Open the list of all possible values of the edit
box by clicking it. Then set the desired value by clicking it.
3.3 Structure
The “Roll mode” control software consists of two independent applications.
- The data acquisition application controls device measures and stores the measured
data.
- The data viewer displays the previously measured data and allows simple voltage
and time relation measurements.
These applications are independent. The only relations between them is the measured
data.
- 11 -