Dataman 520 Series - Manual (Page 27)

DATAMAN 520 series oscilloscope with rollmode
User’s Guide
Fig. 5.3.1.2. – Cursor selection menu
Delete last cursor – Deletes the last added cursor
Delete all cursors – Deletes all waveform cursors
Display times – Displays time periods between cursors
Fig. 5.3.1.3. – Time periods table
Because the string of the displayed time could be too long to display, if you locate the
mouse over the time string, the full information will be displayed. The time periods
are displayed including information of the relation of the cursors. It is the difference
between position of the cursor from the upper row and the cursor from left column. If
the time period value is negative, the cursor from left column points to later time than
the cursor from upper row.
Click “Export to clipboard” to save the time periods information to the clipboard. The
data consists of the pair of cursor’s names followed by data period information (from
position of the second cursor is subtracted the position of the first one). The example
of the clipboard export follows:
TimeSynchro-C1 = 63ms 29us 999ns
TimeSynchro-C2 = 126ms 779us 999ns
TimeSynchro-C3 = 3s 433ms 909us 999ns
TimeSynchro-C4 = 3s 592ms 529us 999ns
- 27 -