Dataman 520 Series - Manual (Page 10)

DATAMAN 520 series oscilloscope with rollmode
User’s Guide
3. Basic information
3.1. Front panel layout
Channel A, channel B, external ARM input and an LED are accessible on the front
panel.
Fig. 3.1.1. – Front panel
If the LED color is:
- green, the device is configured and there is no communication with a computer in
this moment
- orange, the device communicates with a computer
- red, device is powered, but not configured
3.2. Basic terms
This Chapter explains the basic terms used throughout the text.
Click – Position the mouse cursor over the chosen object. Then press and release the
left mouse button.
Double-Click – Two successive clicks of the left mouse button.
Drag – Position the mouse cursor over the object you want to move. Then press the
left mouse button and hold it down. The chosen object moves with the mouse cursor.
After releasing the mouse button the object moves to the new location.
Enter the value into the edit box – Click the edit box. Use the keyboard to enter the
desired value and confirm by pressing “Enter”.
Insert the value into the edit box – Click the edit box. Use the keyboard to enter the
desired value.
Set the value using the scroll bar – It is possible to change a value by simply
dragging the scroll bar slider. Clicking the arrows of the scroll bar increases or
- 10 -