Dataman 520 Series - Manual (Page 21)

DATAMAN 520 series oscilloscope with rollmode
User’s Guide
Fig. 4.14.1. – Channel information
Following information are displayed:
- information about coupling and probe attenuation ratio
- range
WARNING: If the improper probe attenuation is set, the information will be
inaccurate.
„U(t)“ – the last measured value
- trigger threshold voltage
4.15. Main menu
The main menu is located in the top of the main window. Following menu items are
available:
File | Viewer – Opens the data viewer.
File | Exit – Closes application.
Settings | Restore defaults – Reloads oscilloscope settings loaded on the
application start.
Settings | Load settings – Loads oscilloscope settings saved by selecting
“Settings | Save settings” menu item.
Settings | Save settings – Saves oscilloscope settings to hard disk (to other file
than default settings).
Settings | Demo setup – Opens window, where you can select signal
parameters in demonstration mode.
Settings | Color setup – Opens window for color selection.
Settings | Tool tip help – Activates/deactivates the tool tip help.
Settings | High priority - Sets high priority execution of oscilloscope
application.
Help | Index – Displays the Help index.
Help | DATAMAN web – Starts the internet browser installed in the computer
to display the Dataman web site. This feature works only if the computer is already
connected to internet.
Help | Support – Sends the e-mail message to the Dataman customer support.
This feature works only if the computer has connection to internet.
Help | About – Displays information about product.
4.15.1. Demo setup window
The demo setup window is opened after click on the main menu item.
- 21 -