Dataman 48UXP - Manual (Page 69)

Dataman-48UXP not found!
The Dataman-48UXP software does not detect the Dataman-48UXP
on of the parallel ports, or the Dataman-48UXP may be failure and
need to repair.
Make sure the power on the Dataman-48UXP is on. Also check the
parallel connection between the PC and the Dataman-48UXP. If the
Dataman-48UXP shares the parallel port with another device,
remove the other device or move the Dataman-48UXP to its own
port.
Dataman-48UXP power off or disconnected from PC!
The Dataman-48UXP software does not detect the Dataman-48UXP
on one of the parallel ports.
Make sure the power on the Dataman-48UXP is on. Also check the
parallel connection between the PC and the Dataman-48UXP. If the
Dataman-48UXP shares the parallel port with another device,
remove the other device or move the Dataman-48UXP to its own
port.
MOS Technology hex file can be 64KB maximum!
This error is displayed when you want to save the buffer to a disk
file, and the buffer is bigger than 64KB.
The buffer can still be saved to disk, but only the first 64 KB will be
saved. The rest will be lost. Choose another file format if you need
to save the whole buffer.
Manufacturer’s Code unmatched!
This error message is returned when the Dataman-48UXP does a
device ID check.
The device code found on the device is not as expected. You might