Dataman 48UXP - Manual (Page 15)

Minimum PC System Requirements
Win 95/98/ME, Win 2000, Windows XP, Win NT 4.0 or latest
(NT OS system, need NT System ADM).
CUP: PII 750 and above.
RAM: 64MB minimum, 128 MB recommended.
HD: 16 MB of free hard disk space.
Interface:
1. D-25 connector with parallel port ECP or EPP mode, EPP
mode recommended.
2. USB device connector supports USB1.0/1.1/2.0.
CD ROM Driver.
Installing the Dataman-48UXP Hardware
1. Connect the power cord to the Dataman-48UXP power
outlet.
2. Connect the Dataman-48UXP to a parallel port or USB
port using the cable supplied.
3. Turn the Dataman-48UXP power on.
4. The Dataman-48UXP will perform self-test first, the green
LED lamp will on (good) if the system pass self test.
Installing the Dataman-48UXP Software
1. Insert the CD ROM into CD driver of your PC, in my
computer ICON, double click the E driver (CD ROM);
this activates the E: Drive.
2. Double click the set up ‘setup.exe’ ICON will starting the