Auto format detected, From file to buffer, To buffer – Dataman 48UXP User Manual

Page 26: From file address

File name This specifies the file name and its destination

Auto Format Detected

The software automatically detects the format of the file that

is to be loaded. If the desired format of the file different

from the format detected, select the correct file format by

move the cursor to the selection position, click the right

bottom of the mouse, move it to desired file format and click

the right mouse bottom, available file format include: Binary,

HP64000ABS, Intel Hex, MOS Tech Hex, Motorola S

format, TEK Hex, and Straight Hex.

From File to buffer

This option indicates which bytes must be read in the input

file. Select the required choice, default with normal selection,

this load all the file into the buffer, also available in Even

(only even byte load into the buffer), Odd (load the odd byte

to the buffer), also available in 1

byte of 4, 2

byte of 4, 3

byte of 4, 4

byte of 4. Details of the selection, reference

“save buffer to file” section.

To Buffer

This option indicates where the byte previously read is to be

written. This enables you to ‘build’ the memory buffer from

several files, default section with normal (load all the file to

the buffer), Even means load the file to even byte of the

buffer, Odd means load the file into the odd byte of the

buffer, other selection include 1

of 4 byte, 2

of 4 byte, 3

of the 4 byte, and 4

of the 4 byte.

From File Address

Only a selected range of file to be load input buffer, fill in

the address that will contain the first byte into this box, this

is the starting address of the file to be load.