Dataman 48UXP - Manual (Page 31)

party adapter.
Other useful example in device, package and adapter.
1) For example a 1M bit flash (29F010), this chip has three
kind of packages, 32 pin DIP, 32 pin PLCC and 32 pin
TSOP, in Dataman-48UXP software, it only available in
DIP package as selection, to program a 32 PLCC chip, you
will need a 32 pin DIP to 32 pin PLCC one to one pin swap
adapter (PLCC 3232-11), for 32 pin TSOP, you will need a
SDP-UNIV-32TS.
2) For example, a GAL22V10 chip, this chip has two
packages (24 pin DIP or 28 pin PLCC),
Dataman-48UXP only shows 24 pin DIP in device
selection, to program the 28 pin PLCC, a 28 pin PLCC
to 24 DIP adapter to emulated the 24 pin DIP chip is
required (PLCC 2824-04).
3) 27C128/256 EPROM chip, the chip available in 28 pin
DIP and 32 pin PLCC, to program the 32 pin PLCC,
customer needs a 32 pin PLCC to 28 pin DIP adapter,
it emulated the 32 pin PLCC as 28 DIP, this adapter is
PLCC 3228-11.
4) Other SOIC chips may have the DIP/SOIC package, if
the chip has the same pin out and pin count in DIP and
SOIC, select the DIP with universal SOIC adapter will
program the SOIC chip (for example Pic16F73 with
SDP-UNIV-28SO/300 adapter will program 16F73
SOIC chip).
1. Select the type of device that will be the active device.
Mouse
Click on “All”, “EPROM” or “MPU”.