Dataman 48UXP - Manual (Page 59)

Adapter Requirements
Dataman-48UXP supports universal 48-pin TSOP, 44-pin PLCC, 44
pin QFP, 44 pin TQFP, 44 pin SOP, 40-pin TSOP and 32-pin TSOP
pin packages and more. You will need to order an adapter for
non-DIL chip packages. Following is the adapters available to fit
your need. More new adapters will available when a new chip
release. Please contact your local distributor for update adapter
available.
User can build the adapter by himself; detail adapter pin swap table
can be down load from the web:
PLCC2020-01 20 pin PLCC adapter for 20 pin PLCC GAL/PAL
PLCC2824-04 28 pin PLCC adapter (NC =1, 8,15,22) for 28 pin
PLCC GAL/PAL
PLCC3228-11 32 pin PLCC adapter (NC= 1,12,17,26) for
E/EEPROM below 512 K
PLCC3232-11 32 pin PLCC adapter for E/EEPROM with 1M
and up
PLCC4440-01 44 pin PLCC adapter (NC= 1,13,23,33) for 44
pin PLCC 16 bit EPROM
PLCC4440-02 44 pin PLCC adapter (NC= 1,12,23,34) for 44
pin PLCC 875X processor
SDP-UNIV-16/TS 16 pin TSOP universal adapter for 8-16 pin
TSOP
SDP-UNIV-16SO 16 pin SOIC (150mil) universal adapter for 8-16
pin SOIC