Dataman 48UXP - Manual (Page 55)

Count how many verify operations into the display.
Blank check enable:
Count how many blank check activities into the statistic
display
Erase enable:
Count how many erase activities into the statistic display.
Memory protect enable:
Count how many memory protect activities into the
statistic display.
Operation count
Count the total operations and set the target quantities.
Failure count
Count the total failure chips and set the Max failure chips allow.
With the operation, exceed the maximum failure count or reach
the target count will result alarm or warning message display in
the screen (depend on the action set in this page).
Diagnostic