CUE cuenium2 - Manual (Page 38)

User Manual
Page 38
www.cuesystem.com
[email protected]
Wired Touch Panels cuenium 2
Password
A case sensitive password is necessary to login
to the admin web pages. Set a new password
via the New password box. You must reenter the
password in the Confirm new password box. An
error message will appear if the confirmation
does not match, in which case you should reenter
your password again in both boxes.
Finally, the new password is implemented by
clicking the Apply button.
Backup
Backup
The page is used for the backup applications, files
and folders. The Backup copies all Applications,
Application data, File storage and Web storage
to the one archive. This archive is saved to the
PC. To start the backup process, click the Backup
button.
Note: To see the backed-up/restored applications,
click the Applications menu. To see backed-up/
restored files and folders, click the File Storage
menu. The page is used for the backup of all
applications, files and folders.
Note: To see the backed-up/restored applications,
click the Applications menu. To see backed-up/
restored files and folders, click the File Storage
menu.
Restore
READ ALL IMPORTANT NOTES THAT FOLLOW
BEFORE USING THIS OPERATION!
The page is used for the restoring of all
applications, files and folders. Restore copies of
all applications, files, and folders from a backup
archive on the PC to their corresponding locations
on the CUEunit.
To start the restore process, select the desired
backup archive, then click the Restore button.
The restore process can take up to 10 minutes,
depending on the size of the files being restored.
If you want CUEunit’s settings will be restored
too, check the “Restore configuration” box.
The CUEunit’s settings are accessible via the
Configuration, Date and time and Password
menus.
Important note: actual password and IP settings
will be restored too. The restore process takes
from 1 to 10 minutes. It depends on the sizes of
the restored files.
Important note: When restoring files, the running
application will be stopped and all applications,
files, and folders currently stored in the CUEunit
will be deleted! If you want to retain them,
use the Backup command before the Restore
command.
Note: To see the backed-up/restored applications,
click the Applications menu. To see backed-up/
restored files and folders, click the File Storage
menu.