CUE cuenium2 - Manual (Page 19)

User Manual
Page 19
www.cuesystem.com
[email protected]
Wired Touch Panels cuenium 2
On-Wall Models
Installation On the Wall
Installation steps are as follows
1. Remove touch panel from their packaging materials and place it face-down on a soft, non-marring
surface.
2. Insert a thin screwdriver into each of the two little holes on the sides of wall mounting adapter and
push until the metal catches get loose. Remove wall mounting adapter.
Wall mounting adapter
3. Install wall mounting adapter on the wall.
4. Put the touch panel on the wall mounting adapter and push it until the two metal catches slide into
the fixing tabs.
Wall mounting adapter
Screws