CUE cuenium2 - Manual (Page 12)

User Manual
Page 12
www.cuesystem.com
[email protected]
Wired Touch Panels cuenium 2
M
ountIng
Tabletop Models
Desktop models can be placed on any flat surface.
Don’t forget to prepare proper bushing for the cable including standard connector. A minimum diameter
of the bushing for Ethernet connector is approx. 20 mm.
Connect the Ethernet cable and thread it through a hole in the tabletop stand as described below. This
will prevent possible damage to the connector for careless handling with the touch panel.
Both 7” and 12” tabletop models are equipped with tilting tabletop stand. Toughness of tilting mechanism
is set in production and can’t be changed.
Ethernet cable
Tilting mechanism
Tabletop stand
Table
Ethernet cable
Bushing for cable