CUE cuenium2 - Manual (Page 18)

User Manual
Page 18
www.cuesystem.com
[email protected]
Wired Touch Panels cuenium 2
Taking the Touch Panel Out
Insert a thin screwdriver into each of the two little
holes on the sides of the touch panel and push until
the metal catches get loose.
Then you can tilt the upper part of the
touch panel.
Hold the panel upright and pull its bottom part out.
In this position you can tilt the panel to mount ca-
bles.
If you need to remove the panel out
completely, hold it upright, push down-
wards and pull it out.
Step 1 Step 2
Step 3 Step 4