Download user application, Overview, Using cue visual composer – CUE cuenium2 User Manual
Page 25: 25 d, Ownload, Pplication, 25 overview 25 using cue visual composer
User Manual
Page 25
www.cuesystem.com
[email protected]
Wired Touch Panels cuenium 2
d
oWnload
u
ser
a
pplICatIon
Overview
User control application is dedicated to control and it is programmed by Cue Visual Composer
programming tools.
Using Cue Visual Composer
Steps are
1. Connect touch panel to your computer as described in chapter PC Connection.
2. Run Cue Visual Composer on your PC.
3. Open appropriate project in Cue Visual Composer. It’s necessary to have appropriated touch panel
properly inserted and configured.
4. Use tool bar button Final to open Upload and Export Application dialog box.
5. Be sure your touch panel is checked.
6. Use button Upload to start application upload.
7. If touch panel firmware isn’t actual it will be uploaded automatically first and then application upload
will be finished.