CUE cuenium2 - Manual (Page 16)

User Manual
Page 16
www.cuesystem.com
[email protected]
Wired Touch Panels cuenium 2
Guide ruler
Adjusting the Panel on the Wall
If the touch panel does not adhere to the wall perfectly, you can adjust it in the following way.
1. Take the panel out of the back box
2. Loosen the two nuts 6 on the metal holder 7 on the inside of the back box (the one with thorns and
fixing tabs).
3. Adjust the holder in a way to make the touch panel adhere neatly to the wall. Use guide ruler as
described below.
4. Tighten the two nuts 6.
5. Repeat steps 2 to 4 on the other side of the back box.
A
A
ŘEZ A-A
Ra 3,2
) (
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED
IN THIS DRAWING IS THE SOLE
PROPERTY OF FAKTUM DESIGN
ANY REPRODUCTION IN PART OR
AS A WHOLE WITHOUT THE WRITTEN
PERMISSION OF FAKTUM DESIGN
IS PROHIBITED.
WEIGHT.: 0.443 kg
LAST CHANGE: 19.4.2011
c
b
FAKTUM DESIGN
ČERNOVICKÁ 2B
617 00 BRNO
TEL.: 545 210 633
WWW.FAKTUM.CZ
a
NAME: DATE: SPECIFICATION: INDEX:
CAD
A3
NAME: John CREATED: 1.5.2010
GS0038.2
DO NOT SCALE DRAWING
TITLE:
DRW. NO.:
SCALE: 1:1 SHEET 1 OF 1
MAT.: Sestava_FUD
DRAW
TOLERANCES:
ISO 2768-mK
DEBUR AND BREAK
SHARP EDGES
SURF.: 0.133 m 2 SEMI.: --
REVISION:
podomítková krabice
6
6
7
Points of contact between
holder and guide ruller
The wall