Using admin web, 26 using admin web – CUE cuenium2 User Manual

Page 26

User Manual

Page 26

Wired Touch Panels cuenium 2

Using Admin Web

Steps are
1. Connect touch panel to your computer as described in chapter PC Connection.
2. Run Cue Visual Composer on your PC.
3. Open appropriate project in Cue Visual Composer. It’s necessary to have appropriated touch panel

properly inserted and configured.

4. Use tool bar button Final to open Upload and Export Application dialog box.

5. Be sure your touch panel is checked.
6. Use button Export All... to export application and store it in file *.cvca.
7. Run the Internet browser on your PC and type in the same touch panel IP address as you see in Cue

Visual Composer project, window Properties / IP address.

8. Go to page System and check current firmware version. In case there is no actual firmware version

in touch panel, upload firmware version that corresponds to firmware version in the Cue Visual

Composer project..

9. Go to page Applications and upload application file *.cvca.
10. Start uploaded application using button Start.