CUE cuenium2 - Manual (Page 30)

User Manual
Page 30
www.cuesystem.com
[email protected]
Wired Touch Panels cuenium 2
IP Settings
192.168.1.128
255.255.255.0
192.168.1.1
This page is used for setting the communication
parameters for your touch panel. The touch
panel uses standard internet protocol (IP)
communication parameters. Certain parameters
can be reset by the user. On start up, this page
will display current IP address. Carefully note this
addressing information (and any changes you
elect to make to the IP address, subnet mask,
or default gateway). This information must be
entered into the Cue Visual Composer program
written for your specific application. For control
systems with more than one unit, a unique IP
address must be given to each CUEunit.
For setting please select appropriate field using
Edit button and then use numeric keypad.
Be sure to click the Apply button for any changes
to become effective.
Date/Time
19/04/2011
17:01:25
GMT+01:00 CET/CEST
This page is used for setting Date/Time
parameters.
The current date and time can be set. For setting
please select appropriate field using Edit button
and then use numeric keypad.
The time zone box can be selected to enter from
the list activated by button Edit.
Rest of the page is used for synchronization of
the CUEunit’s date and time with an internet
clock. Select Yes for Use Internet clock. Next,
enter the IP addresses (or complete address
name) of the primary and secondary NTP servers.